Here is the front of the raised chassis with card,still tons of work got to g/s the edges,rivets,more armor plate,did I say rivets
![]()
![]()
2
Stormhammer Project
After building my first baneblade,I set my sights higher and wanted the be all end all of Imperial tanks the Stormhammer
http://www.solegends.com/citcat9x3/c92414e...machines-03.htm
The first hurdle I had to overcome was how to cram 2 turrets on the chassis.
I basically had to chop the chassis all to hell and just use the top part.
I had to raise the back turret quite a bit and used card to redo the chassis
![]()
Here is a rough on how the turrets will fit the bottom turret is going to be fixed as I don,t want to chop my second chassis to get the turret ring.
The top will be the moveable turret
![]()
![]()
http://www.solegends.com/citcat9x3/c92414e...machines-03.htm
The first hurdle I had to overcome was how to cram 2 turrets on the chassis.
I basically had to chop the chassis all to hell and just use the top part.
I had to raise the back turret quite a bit and used card to redo the chassis
Here is a rough on how the turrets will fit the bottom turret is going to be fixed as I don,t want to chop my second chassis to get the turret ring.
The top will be the moveable turret
3
1 - 14 of 49 Posts
2
some more work done
![]()
![]()
2
Some green stuff for the edges,twin gun goodness.
I am making the top turret big with the added rear.
For the lower I may try to square off the back but I'm definetly making the cannons a touch shorter buy cutting down to the second ring
![]()
![]()
with side turrets
![]()
![]()
I am making the top turret big with the added rear.
For the lower I may try to square off the back but I'm definetly making the cannons a touch shorter buy cutting down to the second ring
with side turrets
4
The second turret cometh
![]()
Here is the way it will look
![]()
![]()
![]()
3
I got to be honest I secretly hated the plasticard front and almost wanted to rip it off,
until I added the viewports
it really brought it together.
![]()
![]()
until I added the viewports
it really brought it together.
2
Here it is with the construction about 90% done.
I felt this Machine needed a bigger crew served weapon than a heavy stubber,so I mixed and matched and made a light autocannon instead.
I am making this an Ad-Mech machine so I can use for any time period with Mars pattern camoflauge.
And I have the Forgeworld Titan techpriest as the commander.
![]()
![]()
![]()
I felt this Machine needed a bigger crew served weapon than a heavy stubber,so I mixed and matched and made a light autocannon instead.
I am making this an Ad-Mech machine so I can use for any time period with Mars pattern camoflauge.
And I have the Forgeworld Titan techpriest as the commander.
3
The bottom turrets are glued shut,It barely clears as it is.
However the commanders on top are removeable so You can be sure to see a suped up servitor too(good idea):victory:
And by the way I'm that I still smoke
However the commanders on top are removeable so You can be sure to see a suped up servitor too(good idea):victory:
And by the way I'm
that I still smoke
Here is some more progress on thee red basecoat
![]()
![]()
2
1 - 14 of 49 Posts
