Warhammer 40k Forum and Wargaming Forums banner

Stormhammer Project

6620 Views 48 Replies 24 Participants Last post by  bazle
After building my first baneblade,I set my sights higher and wanted the be all end all of Imperial tanks the Stormhammer
The first hurdle I had to overcome was how to cram 2 turrets on the chassis.
I basically had to chop the chassis all to hell and just use the top part.
I had to raise the back turret quite a bit and used card to redo the chassis

Here is a rough on how the turrets will fit the bottom turret is going to be fixed as I don,t want to chop my second chassis to get the turret ring.
The top will be the moveable turret

See less See more
1 - 1 of 49 Posts
That's going to be really cool.

A suggestion for the second turret. Don't cut off the back end of the guns where they attach to the turret, cut a section of the plain tube bit out and glue the muzzle back on. That way you keep all the detail of the recoil springs (or whatever they are) and you also have more feedom in how long you want the barrels to be.
1 - 1 of 49 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.