Warhammer 40k Forum and Wargaming Forums banner

Plastic Abaddon Conversion

19514 Views 23 Replies 16 Participants Last post by  Judas Masias
I converted this model when the plastic Chaos Terminator Lord came out. The old metal model although still a classic just does not fit in with the current plastic Terminators i mean a chaos lord's bodyguard should not be bigger and taller than him right.

View attachment 7908

The conversion is really simple to do here are the things you will need.
1:A Plastic Terminator Lord Box Set
2:An Abaddon the Despoiler model you will have to buy the hole model sense GW no longer sells bits:threaten:.

View attachment 7909

The only bits you will need is the Top Knot,The Talons of Horus,and the Daemon Sword Drach'nyen.

View attachment 7910

Do this after you glue the head to the body so you can get it in the right spot. Now carefully cut off the Top Knot from Abaddon's head then find a drill bit that is alittle bigger than it is and drill a shallow hole in the top of the bald plastic head then pin the Top Knot to the head.

Next use the Sorcerer's staff arm cut it off at the elbow then test fit it so it will be where you want it. then pin Drach'nyen into place. Next you will have to cut the elbow off of The Talons of Horus then cut off the Combi-Bolter arm at the elbow and pin it into place. After that your done.

One thing you might want to do before you attach the head to the body is glue on the Trophy Racks so that the head can fit on better.

Have Fun " I know i did"

Also my friend MBG Rob Bear from FTW Games took the pictures of my model at Games Day this year and kindly posted them on his web site.
See less See more
1 - 7 of 24 Posts
Thanks guys for responding to this thred. @ djinn24 I know he looks kind of Static i had planned on have him pointing or look like he is fireing his combi-bolter but the weight of the Tallons made him fall over. So i made him look like he had just steped up on top of the Chaos Icon ready to shout out a challange to any hero dumb enuff to face him. I hope this coversion helps people out that want a great looking center peace for their Chaos army. I think i also have 2 outher threds for converting plastic Plaguebearers and Bjorn the Fellhanded.

Plastic Plaguebearers: http://www.heresy-online.net/forums/showthread.php?t=69622

Bjorn the Fellhanded:http://blog.spikeybits.com/2010/09/conversion-corner-bjorn-fell-handed.html
Thanks guys i hope this inspires outhers to make some cool conversions of their own.
Thanks i hope everyone enjoys it as much as i do.
Well speeking of Khorn Lords i converted one from the Terminator Lord model cutting the hammer parts off of a plastic Thunder Hammer to make a double headed chain ax type Daemon Weapon. Then i cut the axe parts off of 2 Khorn Chain Axes from the Berzerker sprue. I then filed down the back ends of the ax heads so that they were flat enuff to glue onto the Thunder Hammer shaft. After that was done i glued the arm into place. I then took the Buzz Saw arm from the Ork Nobs sprue and glued it on just to make him look like the sick nasty killing basterd that he is.
Hey guys post up your conversions inspired by this model and lets see what everyone came up with.
Well guy's i am sad to say that i no longer own this model. It's new owner is none other than MBG Rob Bare store owner of FTW Games and Spikey Bits. If u are in the area u can stop by and see my old Abaddon model.
1 - 7 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.