Wargaming Forum and Wargamer Forums

Wargaming Forum and Wargamer Forums (https://www.heresy-online.net/forums/)
-   Project Logs (https://www.heresy-online.net/forums/35-project-logs/)
-   -   Baneblade to Fellblade conversion (https://www.heresy-online.net/forums/project-logs/199746-baneblade-fellblade-conversion.html)

koosbeer 12-28-15 05:23 PM

Baneblade to Fellblade conversion
Good day everyone

Its really good to be back on Heresy. When I started out on my 40k journey a couple of years ago I jumped right into it with some crazy scratch builds. I enjoy the hobby a lot and that is why I still have all my stuff :) A bit more dusty and rusty (the tools not me) but still working. So to the project log...

I decided to convert a Baneblade I bought and built just before I took a break from the hobby. I caught up a tad with the rules of 7th ed and the new Chaos codex and felt that converting the Baneblade to a Fellblade rather than playing a normal Baneblade sounded like a lot more fun.

Motivation for the conversion
I thought that making the Baneblade look like the Iron Legion got their hands on it and turned it into a Fellblade rather than make it look like a Fellblade replica (which would be harder) would be a lot more fun than just playing a Chaos Baneblade. This means that most parts on the Baneblade had to be re-purposed into the functional parts of the Fellblade (if that makes any sense)

A few things need to be done on the Baneblade for the transformation to be complete:

Step 1
With 4 sponsons (2 on each side) the Baneblade has a lot of options. The Fellblade on the other hand rocks 1 sponson on each side and no twin linked bolter with single lascannon bollocks. 1 x Quadlascannon. Step 1 is to convert the two sponsons per side to a single quadlascannon sponson with as little effort as possible.

Step 2
Converting the Baneblade main cannon to a Fellblade Twin-linked accelerator cannon. I will be cutting up the 2 setups they provide you with the kit to turn them into the Accelerator cannon.

Step 3
Making the hull look closer to a Fellblade than a Baneblade. Still no idea how to do this.

Step 4
Adding the Chaos bits. Im going to add some blades to the tracks, some Chaos iconography everywhere and desecrate the old Baneblade.

Step 1 - Pictures
The Baneblade after assembly ( already did it a few years ago). Two sponsons per side.

Two of the sponsons converted to the twin-linked quadlascannons for the fellblade. They will stand out from the hull more than the basic sponsons. Also converted the turrets to have twin-linked lascannons instead of the single lascannon. Finally I pinned the top and bottom turrets to one another so they swivle together. Moving the top turret will move the bottom turret with it.

Thats it for now. As I progress I will upload more pictures. Good to be back :grin:


Ok, absolutely love this idea! The sponson convertion is realy original havnt seen anything like it! I keep eyeing up a fellblade for my death guard but can justify the price..... You've give me hope brother!

In regards to the body of it where me I'd just smooth down some of the sufaces, the armour plateing is a bit bussy.

koosbeer 12-28-15 09:55 PM

Thnx Warmasterwillie. Ive just completed the other sponson as well. Pictures below.

I see the fellblade model is a smooth model with a round main turret. I will maybe try to place some chaos related armor over some of the existing body. I want to make it look like a Baneblade got turned into a Fellblade though. Still thinking about what Im going to do.

Please keep the comments and ideas coming. Thats why I love this community :)

Step 1 - Pictures (continued)
A front view with both sponsons positioned

Other sponson from the side. I filled in some holes with plasticard and rivet pieces of armor.

This is the inside of the sponson. Used a long sowing needle and cut of the ends. Then drilled the turret pins, stuck them over the needle and glued their tops to the top of the turret.

Next up, the main gun!

Tyriks 12-28-15 11:39 PM

Looking nice so far! Using the needle was a good idea.

ntaw 12-29-15 02:57 AM

Absolutely loving this. Welcome back to the hobby!


Originally Posted by koosbeer (Post 2271266)
Used a long sowing needle and cut of the ends.

I often use paper clips of various sizes (bought from the dollar store no doubt) cut up to do similar things. Good improvisation!

koosbeer 12-30-15 02:29 PM

Step 2 - Pictures
This was great to do! It turned out awesome even if I have to say so myself!

Starting off with the parts :)
The two stock cannons of the baneblade all cut up and glued to some pipes.
Assembled with some details and coverings done.

koosbeer 12-30-15 02:43 PM

koosbeer 12-30-15 09:08 PM

Steo 3 - Pictures
The body work part is something that I will have to do with trial and error. I am going to do something with the tracks first. I remove some hull pieces to expose more track. Obviously there is no track to expose so I had to make some track.

This part is really still being developed but I would love some input on this. What do you guys think?


Im going to try and do something like this with the tracks (see below):

Comments welcome :)

GrimzagGorwazza 12-30-15 10:02 PM

Looking good, i'll admit that i'm not a massive fan of the sponsons, that's just personal preference though, they look a little weedy for my taste. Too many thin tubes spread too far apart.
The main gun looks great.
The treads on that superheavy below are oppressor treads from blood and skulls industry. I used them on my killkrusher tank.

Old Man78 12-31-15 01:21 AM

Okay very innovative idea, but think you could refine this better. The sponsons do not gel with the rest of the build in my opinion, they look a bit delicate and not as brutal as the rest. I think you would have been better served by having the quad las cannon in a tight group, by mounting them all in the heavy bolter sponsons with the 2 top barrels shorter than the bottom.

All times are GMT. The time now is 04:00 PM.

Powered by the Emperor of Man.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

For the best viewing experience please update your browser to Google Chrome