Wargaming Forum and Wargamer Forums

Wargaming Forum and Wargamer Forums (https://www.heresy-online.net/forums/)
-   Project Logs (https://www.heresy-online.net/forums/35-project-logs/)
-   -   Blackadders Warlord Work in Progress (https://www.heresy-online.net/forums/project-logs/107203-blackadders-warlord-work-progress.html)

Blackadder 06-27-15 12:55 PM

I'm hoping the Lucius Reavers (2) and Warhounds (2) will flank the Warlord on the two levels for display purposes (Space available) and the Mars versions can serve as alternative displays....

and yes I did pre-order the new Mars Warlord before Ms BA got the straight-jacket securely in place with the help of the local EMS.

venomlust 06-27-15 02:24 PM

Quote:

Originally Posted by Blackadder (Post 2166490)
I'm hoping the Lucius Reavers (2) and Warhounds (2) will flank the Warlord on the two levels for display purposes (Space available) and the Mars versions can serve as alternative displays....

and yes I did pre-order the new Mars Warlord before Ms BA got the straight-jacket securely in place with the help of the local EMS.

As they dragged you away, "You haven't seen the last of me!"

Blackadder 06-29-15 10:35 AM

An Interesting Image:

Found this comparison image on the internet and superimposed the skulls which are virtually the same size.

http://i.imgur.com/9lAmRIm.jpg

One might extrapolate based on this image that the Lucius Warlord stands taller than the Mars by a considerable amount.

Blackadder 07-04-15 07:14 PM

Auto Focus Failure

There is something wrong with my camera's auto focus

http://i.imgur.com/xpqhJjB.jpg
http://i.imgur.com/xpqhJjBl.jpg

But these two images convey the gist of the subject at hand namely the priming of the Gantry so with another camera later on I shall be presenting the cranes and paraphernalia requisite for a heavy equipment maintenance area.

http://i.imgur.com/8CIMIkB.jpg
http://i.imgur.com/8CIMIkBl.jpg

Right now with the overall gantry primed gray I think it shows off Luteus in a fine setting for display purposes

http://i.imgur.com/LNvYtEZ.jpg
http://i.imgur.com/LNvYtEZl.jpg

Providing of course you have oodles of empty space in your "Man Cave"....Ha!

Blackadder 11-06-15 12:10 PM

Just reread the past few posts of Kreuger and I'm surprised at the lack of responses to his artistic endeavor; anyway I'm preparing to reopen this thread now that my carpet is installed and the house is in a reasonably unchaotic state of order and I need a source for the soft 'aquila' pictured here:

http://i.imgur.com/UceHOOF.jpg
http://i.imgur.com/UceHOOFl.jpg

Model kit or vehicle other than the obvious resin Baneblade :D preferably on a sprue i.e. not moulded into the model surface.

Iraqiel 11-07-15 12:42 PM

The two that spring to mind are one of the armour plates on the hellhound turret, as seen in the GW display photo:
http://www.games-workshop.com/en-AU/...uard-Hellhound

And the one moulded onto the Wyvern blast shield:
http://www.games-workshop.com/en-AU/...ilitarum-Hydra

Of the two, the first is closest to what you were after, I suspect.

Otherwise, FW does a brass etch aquilla pack?

Blackadder 11-07-15 01:05 PM

Quote:

Originally Posted by Iraqiel (Post 2247186)
The two that spring to mind are one of the armour plates on the hellhound turret, as seen in the GW display photo:
http://www.games-workshop.com/en-AU/...uard-Hellhound

And the one moulded onto the Wyvern blast shield:
http://www.games-workshop.com/en-AU/...ilitarum-Hydra

Of the two, the first is closest to what you were after, I suspect.

Otherwise, FW does a brass etch aquilla pack?

Thanks for the reply but those are the angular stylized Aquila and a flat relief, the one on the Baneblade superstructure has more sculptured wing feathers and has a bas-relief effect.

I know FW is given to appropriating GW styrene 'bitz' when casting their resin models so I thought that there was a kit that supplied that bit(z).

I suppose I shall have to carve my own; sigh.

Blackadder 01-03-16 07:06 PM

Back To the Warlord:

While I am designing the T'hawk cockpit interior I ran across my Tech priests for the Warlord. I'd forgotten I made these to go in the upper gallery of the Warlord interior in the altar area.

http://i.imgur.com/x6jTfb8.jpg
http://i.imgur.com/x6jTfb8l.jpg


Since then I made a few priest consoles and added a FW production Tech Enginseer.

http://i.imgur.com/VV8Pw7i.jpg
http://i.imgur.com/VV8Pw7il.jpg

The problem with you Blackadder is, "You can't paint!"

Iraqiel 03-23-16 12:26 PM

Excellent to see some more progress, that titan gantry project has me inspired to do something similar!

Blackadder 03-23-16 02:23 PM

Thanks, right now I am in the process of modifying support vehicles and maintenance crews for the Titan in the gantry. Images to be posted soon.


All times are GMT. The time now is 09:08 PM.

Powered by the Emperor of Man.


vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome