|Topic Review (Newest First)|
|10-30-17 05:51 AM|
Originally Posted by ntaw View Post
I'll give it some thought, see how much time I have, and keep you posted if I come up with anything valuable.
|10-30-17 02:27 AM|
There will still be plenty of walkways, but they will be more bridge-like instead of the 'main' level of play. I constantly get different ideas "but this will connect if I do it this way" but it always ends up being "OK, that will connect if I set the table up this way but what about the other dozen ways it can go". If you have time to kill and want to draw something up by I'll gladly check it out but as you can see I'm pretty well moved on from the idea. Only thing stopping me from executing more terrain building is my Blood Angels, who are getting entirely revamped for 8th edition.
|10-29-17 04:35 PM|
I could me misinterpreting, but it seems that your goal was to have walkways connecting the tiles one level up from the bottom (the grated units)? Or was it to build walkways between the buildings one level up from that?
For the first, it seems you could just have something sturdy and slightly bigger than you need, so that there's a half inch or more of tile on the platform. Lengths would vary, but there is enough consistency in tile size that it would work out. If that doesn't make sense I can take quick demonstration pics when I get home later.
For the second, that's definitely a lot harder. A way around the railing is to build the walkways with small stair things on either end so that it basically hooks over the railing on either side. A way around the variable length (to a certain extent) is to make adjustable pieces, kind of like this but mirrored so that there were the thicker parts on both ends. Obviously this would be a bit tricky to construct, but I think it could give you the function you want. I'm not sure how to make it look nice or make it out of something non-metal (which it would likely have to be for weight, depending on how your buildings are constructed), but I'm happy to put some thought into it / make prototypes if you like while you work on other things.
|10-27-17 06:10 PM|
The real trick is that when you build walkways for terrain on a flat table if a thing doesn't meet up you nudge the terrain piece over a centimetre and all problems are solved. I can't nudge a sump station over, it's in the tile it sits in. Not only would I have to break the railings off and rejig the connection to the walkways but I would have to have too large a variety of walkway lengths since there's no way, on a modular table, to predict where terrain elements will end up being. My other thought was to build support structures so that walkways could go halfway or something then go the rest of the way to their destination but again with a modular table and terrain pieces that can't be nudged closer to each other it just didn't work out without just resting pieces on top of other pieces, which I think looks [not great] otherwise I'd have just bought one of the million MDF options for all this.
The issue came down to this: I don't want to spend eons setting up my table. I want to put the squares down and put terrain on it without trying to space things out and dick around with stuff; I just want it to work so dice can be rolled. Having terrain elements separate from each other makes that a hell of a lot easier to accomplish. I'll still have raised walkways over canals all over the place but the walkways won't be the 'main level' of play any more, that will be the current top of the table. I've also decided that I will need longer walkways with a 'hose down' station or two to span the 'pool' area, so there will be plenty of terrain congestion and levels of play offered still.
|10-27-17 04:48 AM|
|JAMOB||I'm not sure I understand your predicament - can you not just have a bridge that is bigger than necessary, for example a "metal sheet" that someone cut or some pipes/etc. that hang over both sides? If it's a little crooked, that shouldn't matter, should it?|
|10-22-17 03:27 PM|
Well, the walkways I had planned are not going to work. My table isn't flat in that there's 1/4" height differences all over the place on the top that essentially stops me from being able to put a modular walkway system on top of a modular board...or at least my brain isn't able to come up with it. I spent a few hours a couple nights ago with the board out and paper cutouts of what I planned on building and came up with this solution.
The sump station I built will have a raised platform in front of it with stairs coming off either side, and I'll build another one the same way that, in this picture, would sit opposite of it. The three squares will be big support pillars with ramshackle sniper nest sort of platforms up top. The idea will be you have to use a full movement/advance to get up there or be deployed up there (unless you can FLY of course). The big square off to the side will be a large 10x10" platform with a freight elevator on it. I'll also be making some raised foot bridges to go over any canals that need to be gone over. Pipes just kinda sit around doing whatever at this point. Once I get those things done I'll see where the board's at, there's more ideas if I need to fill in some more space.
|10-22-17 05:54 AM|
|JAMOB||Dude this looks amazing! And I am always a slut for Necromunda-specific terrain. I love it!|
|10-17-17 04:04 PM|
It's worth keeping in mind that this table is entirely designed for Shadow War/Necromunda when thinking of heights and all-around accessibility. In 40k there's no need for ladders to get up to places since terrain doesn't effect movement much and in Shadow War the models aren't supposed to be able to traverse it without some sort of special upgrade or ability that helps them navigate vertical distances.
I've been thinking of how to add in another level of walkways above the one I'm currently planning but everything I've thought of so far only makes it very hard to reach into the centre of the table. Once I build the walkways I'm currently planning and another sump station I'll have a total of 5 levels at varying heights. I could try adding a 6th by doing tiny little catwalks between the pillars I have planned but it's currently tricky for me to develop a reason for them being there with the plan as-is. Definitely rolling around in my mind though.
As for LoS, I'll be adding in ramshackle added-on defenses only if once I get everything built and laid out it's still necessary. The pipe system will be running underneath the walkways to help block things right off the hop. Goddamn Genestealers will ruin your day with great ease on this board, I promise you
|10-17-17 11:56 AM|
That looks damn awesome dude! When it all comes together that will make some really amazing battles. Personally I'd be inclined to create some high level walkways and vertical scatter terrain (ladders up to 1st floor from the top of trenches etc. That would really open up the board but create some cool LOS blocks.
Cant see the squad one turn, then "whoooah, how'd they get into combat with me!" Goddamn genestealers.
|10-17-17 01:35 AM|
Originally Posted by Brother Dextus View Post
Can't wait to get down on the walkways. Gotta get some more supplies first, I ran out of what I use for the trim on walkway platforms and have to get more but need to buy in bulk and order in so who knows how long that will take.
|This thread has more than 10 replies. Click here to review the whole thread.|