Wargaming Forum and Wargamer Forums - View Single Post - Chaos Combi-Flamer
View Single Post
post #1 of (permalink) Old 12-17-10, 08:41 PM Thread Starter
Maverike Prime
Senior Member
 
Maverike Prime's Avatar
Maverike Prime's Flag is: USA
 
Join Date: May 2010
Location: Virginia
Posts: 213
Reputation: 6
Default Chaos Combi-Flamer



Combi-weapons seem to be one of those miscellaneous items that everyone tries to make their own way. I see nothing wrong with that. To encourage the effort, I submit my method for converting a Combi-flamer. The interesting thing about this method is you don't need to sacrifice a bolter to accomplish it. Though you do need a bolter ammo supply of some form. In this tutorial I use a belt feed because I like the look better then a clip.

What you will need:
  • Flamer
  • Bolter Clip (or Belt Feed)
  • Hobby Knife
  • Hobby File
  • Pin Vice Drill
  • Plastic Glue

Got your materials and tools? Good. Lets get to work.

Step 1:
The first thing you need to do is cut up the Flamer. You will be making two cuts in this step, one directly behind the flamer muzzle and the other immediately forward of the main body. This will remove the tubing between the body and the muzzle. I would recommend NOT filing down the cut edges on the back of the muzzle yet. However, you can file down the cut end of the main body.


Step 2:
Got it cut out? Good. Now take the muzzle head and cut out the igniter assembly on the bottom.


Step 3:
Once you have the igniter cut off you can drill out the barrel. At the very least I recommend drilling out the lower barrel of the muzzle for the Bolter itself, though I prefer to drill out both barrels. This is why I suggested not filing down the cut end of the muzzle before. If you look at it, you'll see a slightly raised portion where the tubes were connected before you cut it. If you drill straight through the centre of those circles you'll come out right in the middle of each barrel in the muzzle.


Step 4:
Now we're done with the muzzle but we still need to do one modification to the main body of the Flamer. Cut off the fuel canister as shown.


Step 5:

Glue the Bolter clip/belt feed to the bottom of the Flamer body where the canister was. Then glue the muzzle to the front of the body. There you are. A brand new Combi-Flamer.


As an aside, I'm considering using the discarded ignite assembly in a crude power claw conversion. I'll post if I complete it.

Be Sure to follow me on:


Maverike Prime is offline  
 
 
For the best viewing experience please update your browser to Google Chrome